Free DIY Furniture Plans to Build an IKEA Inspired Single Hemnes Bookshelf
This project is really, really simple, definitely a project a first time builder can handle, and pretty darn cheap to make. In fact it?s also cheap to buy, except when you want to have yourself and entire library full of bookshelves. Now that can get pricey. So, we begin with the Hemnes Collection of pieces, because I need a library of shelves. Yes, this may be selfish, or shelfish? hehehe but I am sure we are still doing something for the greater good of mankind here..are we not? We are providing our fellow men with the satisfaction of building something with their own two hands, and saving them money, lot?s of money, also?we are giving them custom furniture pieces. That?s right, anyway you slice it, it?s exactly how you like it! We make it your way!
Did you know you can now subscribe to only the Build It Topic? That?s right..for those of you fine friends who are in this only for enjoyment of the woodworking craft and free plans, you can now customize your TDC experience and receive only the free plans, gallery showcase articles, and tips and tricks for building! Exciting right? Click here to subscribe via a feed reader and here to subscribe via email. But, if you want it all, including other various DIY Projects, Landscaping, Tech Articles, and Resources for your home and yard?then I would suggest subscribing to the main feed here or via email, and you won?t miss out on a single thing!
To view other Build It! Plans in the Visual Plan Index, click the button below…
Dimensions are shown Below:
Oky dok, let?s talk about what you will need to build this bookshelf!
Kreg Jig ? this is optional but will make some of your connections much much easier?recommended.
Saw – Optional if you have your local lumber supply cut your boards.
**2? Wood Screws ? not needed if using Kreg Jig Pocket Hole System
**3? Wood Screws ? not needed if using Kreg Jig Pocket Hole System
1 1/4? Pocket Hole Screws
2 1/2? Pocket Hole Screws
7/8? Finish Nails or Brad Nails
2? Finish Nails
5 ? 22 at 8?
1 ? 12 at 8?
1 ? 13 at 6?
3 ?112 at 8?
1/2 Sheet (2?x8?) of 1/4? Plywood, Particle Board, or MDF
4 ? 22 at 76 3/4? Legs?
9 ? 22 at 16 1/4? Rails
6 ? 12 at 11 1/4? Side Trim
1 ? 12 at 19 1/4? Top Trim (add 2? if this unit will stand alone)
1 ? 13 at 19 1/4? Top Trim (add 2? if this unit will stand alone)
2 ? 112 at 72 3/4? Side Panels
6 ? 112 at 16 1/4? Shelves
1 ? 112 at 19 1/4? Top (add 2? if this unit will stand alone)
1 ? 1/4? ply at 19 1/4? x 73 1/2? Back Panel
Use glue to secure your joints and Consider Painting individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using, or contact me via email or post to the forum before you move ahead. My contact info can be found on the main page of my site.
Build your Sides: Fasten the Panels to the Legs using your pocket hole systems set for 3/4? stock and your 1 1/4? pocket hole screws and glue. If you aren?t using a pocket hole system, use 3? screws and glue. The panels will sit flush with the inside of the legs, leaving 3/4? on the outsides to allow for trim later. The panels will sit 4? from the bottom of the legs.
Attach the Rails: Use your pocket hole system set for 1 1/2? stock and your 2 1/2? pocket hole screws and glue. If you aren?t using a pocket hole system use 3? screws and glue to attach. The rails will sit flush with the top of the legs and panels and on the bottom they will site flush with the bottom of the panels.
Fasten the Shelves in Place. Use your pocket hole system set for 3/4? stock and your 1 1/4? pocket hole screws and glue. If you aren?t using a pocket hole system, you can use 2? screws and glue from the outside of the panels, just be sure to countersink. Place pocket holes along the back edge of each shelf in addition to the sides for attaching to the back side rails in the next step.
Attach the Backside Rails: Fasten the rails to the Legs using your pocket hole system set for 1 1/2? stock and your 2 1/2? pocket hole screws and glue. Then use your 1 1/4? pocket hole screws and glue to fasten the rails to the shelves allowing the top of the rails to sit flush with the top of the shelves.
Fasten the Top and the Top Trim in place: Use your 2? finish nails and glue to secure. The 12 on the backside will sit completely flush with the 22 just below it, while the 13 in the front will overhang on the frontside by 1?. The sides are to be flush with the legs here, with no overhang so that you can stack these next to one another without having an issue with the top overhanging. If this is to be a single unit without others next to it, you can give the top overhang to give it a more decorative appearance.
Fill and Screw, Nail or Pocket Holes, Sand and Finish as Desired. For Finishing Tips and Tricks visit my Finishing School
If you enjoyed this post, comment below, Share it or Like it, and subscribe to my feed to stay up to date!
You can now also:
**Disclaimer: Some rights reserved. Private use only. Plans from this page are not to be used for commercial purposes or republished without the express written consent of Rayan Turner, The Design Confidential I hope to provide accurate plans, however, I cannot guarantee each plan for accuracy. Not every plan that I post has been built and tested, so you are building at your own risk. It is recommended that you have a clear understanding of how the project works before beginning any project. Please contact me if you find an error or inaccuracy so that I might fix it.
View this article at The Design Confidential »
Dry-B-Lo of North Alabama
Company does NOT stand behind the product or it's franchises
Company does NOT stand behind the workmanship of their franchise installers... Read More
Published by LM